Dell 0F9W8 4TB 3.5" 7200 12Gbps SAS Large Form Factor Hard Drive
Part Number: 0F9W8
Transfer Rate: 12GB/s
Rotation Speed: 7.2K - 7200RPM
Form Factor: LFF - Large Form Factor - 3.5"
Tray: No Tray - As Pictured
The replacement Dell 0F9W8 SAS drive allows you to add another 4TB to your Dell Poweredge server, if you are adding it as an additional SAS hard drive. If replacing a 4TB NL SAS you will want to make sure you are replacing with a drive with the same specifications as your current drive or a larger drive. If you are installing a larger drive in an array it will read as the size of the current drives of the array. If the rotational speed or transfer speed is less on the replacement drive the whole array will slow down to the speeds of the replacement drive. The majority of Poweredge servers come with either a 2.5” Chassis or 3.5” Chassis you will want to make sure this 4TB SAS 3.5 will be the right physical size drive for your Dell Poweredge server.
The used Dell 0F9W8 is a Toshiba MG04SCA40EN. This Toshiba drive was originally selected by Dell as one of the Toshiba models of drives that was up to the reliability and quality Dell demands out of the parts they will put their part number on.
This Dell drive has a rotational speed of 7200 and transfers data at a speed of 12GBs. The drives physical size is 3.5. The interface of this used Dell drive is SAS and has a total capacity of 4TB
If you have any questions on Dell hard drives please call us at 952-831-1032.