DELL FNW88 1TB 7200RPM NL SAS 3.5" 6GBPS

SKU:
FNW88
|
UPC:
Does not apply
Condition:
Refurbished
$54.99
Write a Review

 

Description: 1TB 7200RPM NL SAS 3.5" 6GBPS

Part Number: FNW88, 0FNW88

 

DELL FNW88 1TB 7200RPM NL SAS 3.5" 6GBPS

Manufacturer: Dell

Capacity: 1TB

Spindle Speed: 7200 RPM

Size: 3.5”

Transfer Speed: 6GBPS

The NL SAS drive is basically a SATA enterprise drive with a SAS interface. Performance will be basically the same as a SATA drive. The SAS interface does have benefits over the SATA interface.

The replacement Dell FNW88 SAS drive allows you to add another 1TB to your Dell Poweredge server, if you are adding it as an additional SAS hard drive. If replacing a 1TB SFF you will want to make sure you are replacing with a drive with the same specifications as your current drive or a larger drive. If you are installing a larger drive in an array it will read as the size of the current drives of the array. If the rotational speed or transfer speed is less on the replacement drive the whole array will slow down to the speeds of the replacement drive. The majority of Poweredge servers come with either a 2.5” Chassis or 3.5” Chassis you will want to make sure this 1TB SAS 3.5 will be the right physical size drive for your Dell Poweredge server.

The used Dell FNW88 is a Seagate ST1000NM0023. This Seagate drive was originally selected by Dell as one of the Seagate models of drives that was up to the reliability and quality Dell demands out of the parts they will put their part number on.

This Dell drive has a rotational speed of 7200 and transfers data at a speed of 6GBs. The drives physical size is 3.5. The interface of this used Dell drive is SAS and has a total capacity of 1TB

If you have any questions on Dell hard drives please call us at 952-831-1032.

 

Shipping Cost:
Calculated at Checkout